|
|
HAWS SAFETY EQUIPMENT
 |
Emergency Eyewash - ABS
Model 7260BT wall-mounted eyewash features a round
11" green ABS plastic receptor, aluminum wall bracket, and twin Soft-Flo ABS
plastic anti-surge eyewash heads. Model is supplied with a waste tailpiece and
trap. Supply: 1/2" IPS. Waste: 1 1/2" IPS. Model 7260BT is certified by CSA to
meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Includes wall bracket & trap. (Also available with Eye / Facewash nozzles)
|
|
|
|
 |
Emergency Eyewash - Stainless
Model 7460BT wall-mounted eyewash features an 11"
round stainless steel receptor, aluminum wall bracket, and twin Soft-Flo ABS
plastic anti-surge eyewash heads. Model is supplied with a waste tailpiece and
trap. Supply: 1/2" IPS. Waste: 1 1/2" IPS. Model 7460BT is certified by CSA to
meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Includes wall bracket & trap. (Also available with Eyewash / Facewash nozzles)
|
|
|
|
|
 |
Laboratory Eye Wash
Model 7612 countertop mounted polished
chrome-plated brass swing-away eyewash that features twin polished chrome-plate
brass anti-surge Soft-Flo heads. Unit designed to be mounted on right or left
side of sink. Supply: 1/2" O.D slip joint.
|
|
| Model: 7612 |
(Right side mounted) $297.00 |
| Model: 7612LH |
(Left side mounted) $336.00 |
|
 |
Laboratory Eye/Face Wash w/ 12’ hose
Model 8908 wall-mounted eye/face and body spray
features Feather-Flo® ABS plastic eye/face wash head positioned at 45 degrees,
stay-open squeeze lever valve, 12-foot yellow recoil hose and wall mounting
bracket with grabber clips. Supply 1/2" IPS. Model 8908 is certified by CSA to
meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
|
|
 |
Portable Eye Wash
Model 7500 portable gravity operated eyewash
features a 16-gallon capacity, FDA high-density green polyethylene tank that
provides for over 15 minutes of full pattern flushing at .4 gpm. Pulling the
yellow activation arm down to the open position activates unit. Tank has
handles on top and side to allow for easy handling. A wide-fill opening with
threaded cap permits easy inspection, cleaning and filling. Model supplied with
wall bracket and bacteriostatic additive to permit storage of water for up to
six months. Measurements: 22 1/2" high, 21 1/2" wide, 19 1/2" deep. Model 7500
is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and
Shower Equipment. Model shown in operating position
|
|
|
|
 |
Portable Eye Wash 10 Gallon
Model 7602.10 portable air pressure operated
eyewash features a 10-gallon capacity stainless steel tank. The eyewash
features twin Soft-Flo anti-surge heads. Unit includes an air pressure gauge,
pressure relief valve, tire-type air fill valve and bacteriostatic preservative
to permit storage of water for up to six months. Measurements: 43" high, 12
1/4" diameter.
|
|
|
|
 |
Laboratory Eye/Face Wash
Model 7611 countertop mounted polished
chrome-plated brass swing forward to activate eye/face wash that features twin
ABS Feather-Flo® heads. This model is left or right side mountable. Supply:
1/2" O.D slip joint. Model 7611 is certified by CSA to meet the ANSI Z358.1
Standard for Emergency Eyewash and Shower Equipment. (Sink not included)
|
|
|
|
 |
Laboratory Combination Shower/Eyewash Unit
Model 8300 combination shower and eyewash features
a 10" ABS plastic showerhead and a stainless steel eyewash receptor with twin
Soft-Flo ABS plastic anti-surge eyewash heads. A pull rod activates shower.
Push flag or foot treadle activates eyewash. Pipe and fittings: 1 1/4" Schedule
40 hot-dipped galvanized steel. Supply and waste: 1-1/4" IPS.
Model 8300 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency
Eyewash and Shower Equipment.
|
|
|
|
 |
Emergency Shower/Eyewash Booth
Model 8605WC barrier-free combination shower and
eye/face features a white reinforced molded fiberglass booth with a 10" ABS
plastic showerhead and twin ABS plastic Feather-Flo® eye/face wash. A pull rod
activates shower. Push flag activates eyewash. Model includes a galvanized
steel floor grate. Supply: 1". Waste: 3" caulk. Model 8605WC is certified by
CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower
Equipment.
|
|
|
|
 |
Polar Booth II
Model 8606 Polar Booth II decontamination booth
series is an ideal economical alternative when extreme weather conditions are
not a factor, but a multitude of features are required. It is suitable for
cleanroom environments in most applications, as well as in areas where material
corrosion resistance, user privacy, or wastewater disposal is a concern.
Specifications
Enclosure:
Booth: Exterior and interior skins are constructed from high-density
polyethylene combined with 1-1/8" thick fire retardant foam insulation to give
an approximate value of R8. Protected with UV inhibitors, the exterior skin is
bright yellow with Safety Green graphics. High visibility green mold-in
directional arrows assist in guiding the user to the entrance. Grate: Floor
grate is powder-coated steel with corrosion-resistant substrate. Multiple
Drench Systems:
Shower: Model 8129FC 10" ABS plastic head with integral 20-gpm flow control in
Safety Green .
Activation:Single motion pull down handle operates a stay-open chrome-plated
brass valve with a bleed hole.
Eye/Face Wash: Twin Feather-Flo® ABS plastic eye/face wash heads in Safety
Green with integral flip top dust covers that protect heads and automatically
release with water pressure (Model SP21).
Activation: Pull down arms operate a polished chrome-plated stay-open valve.
Flow Control: Dual automatic pressure compensation devices ensure steady 5-gpm
water flow under various flowing pressures. Plumbing: Schedule 40 powder-coated
galvanized steel pipe.
Supply: 1" IPS.
Waste: 3" caulk
|
|
| Model: 8606 |
Polar Booth II $5760.00 |
|
| To Call In Order: |
866-340-7275 9:30AM to 5:00PM EST |
| |
954-345-4374 |
| |
| To Fax Order: |
954-340-2457 24 Hours A Day |
| E-Mail: |
Sales@ParklandScientific.com |
| Mail to: |
Parkland Scientific
10918 Wiles Road
Coral Springs, Fl 33076 |
All contents Copyright 2008 by Parkland Scientific, Inc. Any information on this website may not be copied, reproduced or distributed without prior written permission.
Parkland Scientific Inc is an authorized distributor for a broad range of laboratory equipment and scientific equipment designed for pharmaceutical, educational, medical, life sciences and bio-tech industries. Our laboratory equipment product line includes Research Anesthesia Machines, Microscopes, Centrifuges, Scales, Balances, Sinks, Stainless Steel Tables, Stainless Steel Medical Cabinets, Steam Sterilizers, Stools, and Clean Room products.
|
