Large tank Oxygen Pressure Regulator
This medical oxygen regulator is preset to 50 PSI for ideal use with a veterinary anesthesia machine and may be used on large oxygen tanks such as H or K tanks. A male DISS-F connector allows easy connection to any O2 hose equipped with a DISS-F connector.
|
|||||
Related products
Gas Anesthesia Mask for Stereotaxic
Designed for mice or rats in a Stereotaxic Instrument. The Gas Adaptors for Stereotaxic instruments, enable gas anesthesia of rats or mice in a Lab Standardâ„¢ or other stereotaxic instrument, without exposing the researcher to the gas. The Gas Anesthesia mask is installed by removing the nose clamp from the standard rat adaptor, and sliding the adaptor over the incisor bar, with the cone opening toward the open “U”. The animal (rat or mouse) is installed by placing its teeth over the incisor bar, and sliding the adaptor forward until the cone is snug about the animal’s nose, thereby substituting for the nose clamp. The teeth and the cone provide a snug, stable hold. Anesthetic gas flows in the tubing connector, past the animal’s nose, and out the other side, where it may be routed to recycling, exhaust, or gas analysis instruments.
|
|||||||||
Ohmeda Oxygen Quick-Connects
These versatile connectors allow an anesthesia machine equipped with a male Quick-connect, fast access to an oxygen source via ohmeda female quick-connects. Female connectors shut off the flow of oxygen unless connected to a male, and may be used for ceiling drops,etc. Custom lengths of green high-pressure O2 hose may be ordered by the foot and fitted with the connectors of your choice. DISS-F “screw-on” connectors are available to attach a short hose with male Quick-connect to the anesthesia machine.
| 34020 | Ohmeda Male Quick-Connect | $38.00 | |
| 34020F | Ohmeda Female Quick-Connect | $48.00 | |
| 25000 | Oxygen Hose Per/Foot | $2.60 | |
| 24240 | DISS Female threaded Connector | $9.00 |
Rodent Non-Rebreathing Circuit with Nose Cone
This acrylic manifold allows the position of the inside gas supply tube to be adjusted for any size rat or mouse, reducing dead-space and preventing CO2 build up. The nose gasket can be customized to fit any shape by cutting a hole in the diaphragm, and the evacuation end accepts both 19mm & 22mm hosing. Includes 10 replaceable diaphragms. ARES500 nosecone/mask measures 25mm diameter. An optional 38mm diameter mask is available for larger rodents.
| Model ARES500 | Rodent Non-Rebreathing Circuit with Nose Cone | $72.00 | |
| Model ARES505 | Waste Gas interface to connect RES500 to medical vacuum outlets. | $55.00 |
Cylinder Floor Stand
Floor base holds C, D, or E cylinders.
| MCS | Cylinder floor stand | $45.00 |
