FOOT STOOL WITH RAIL

    • 11” x 14” platform with non-skid rubber mat
    • 9” high step
    • Chrome plated steel legs & 34” high rail
    • Max weight capacity 300 lbs
    Model 6094 Foot Stool w/ Hand Rail $45.00

    Waste Gas Evacuation Fan

    OSHA compliant method for removing anesthesia waste gas to outside air. Ultra-quiet, high quality American made ball bearing motor has five times the life span of a regular bearing motor and uses less electricity. Includes built-in circuit breaker, hour meter, stainless steel enclosure, mounting brackets, and 5 year or 10,000 hour warranty. No balancing outlets are required – Uses model EVC680 outlets and standard scavenger interface valves.

    • Capacity: 1-30 anesthesia machines.
    • Inlet/outlet: 2″ PVC or ABS Pipe
    • Electrical: 115V, 50-60Hz (Full load amps 3.0)
    • Compliance: UL recognized US & Canada, Certified to UL-507 standards from TUV-SUD America inc. Certified for US & Canada.
    EVC3000 Waste Gas Evacuation Fan $819.00

    Rodent Non-Rebreathing Circuit with Nose Cone

    This acrylic manifold allows the position of the inside gas supply tube to be adjusted for any size rat or mouse, reducing dead-space and preventing CO2 build up. The nose gasket can be customized to fit any shape and the evacuation end accepts both 19mm & 22mm hosing. Includes 25 replaceable diaphragms.

    Model ARES500 Rodent Non-Rebreathing Circuit with Nose Cone $62.00
    Model ARES505 Waste Gas interface to connect RES500 to medical vacuum outlets. $42.00

    Multi Station Board with Nose Cones

     

    Shown with Anesthesia machine, vaporizer & 6-place supply manifold.

    Shows surgical board minus one nose-cone & plug.

     

     

     

    Features:

    • 6 numbered subject positions
    • 22mm evacuation port for passive evacuation of gases
    • Adjustable holding straps (extra tubing included)
    • Uses industry standard RES500 coaxial non-rebreathing nose cone circuit
    • The number of circuits can be adjusted using plugs included.
    • Includes 10′ of 22mm evacuation hose
    • Can be used with F/AIR Canisters
    RES3100 Multi-Station Board without nose-cone circuits $688.00
    RES3200 Multi-Station Board with 6 nose-cone circuits $1,060.00
    RES3160 Rubber tie downs – each $12.00
    RES537 6 – Port Stainless Manifold w/ Splitter Valves & Tubing $287.00

    > Click for More Information

    Small Animal Anesthesia Masks

    Plastic anesthesia masks are available in a broad range of patients including large rodents, cats, dogs, and exotics. The masks feature a 15mm connector, clear cone for full visualization and a highly flexible, replaceable rubber diaphragm to help provide a leak-free fit.

    Item 93805027 Small feline 1-3/4″ OD x 7/8″ ID x 15/16″L $49.00
    Item 93805028 Medium feline 2-1/4″ OD x 1-3/16″ ID x 1-1/8″L $49.00
    Item 93805029 Large feline 2-3/8″ OD x 1-5/16″ ID x 1-3/8″L $49.00
    Item 93815026 Small Canine 3-7/16″ OD x 1-3/16″ ID x 2-7/8″L $54.00
    Item 93815028 Large Canine 5-1/8″ OD x 2-1/8″ ID x 4-3/4″L $54.00
    Item 91815014-18 Replacement Diaphragms (Specify size) $33.00

    Click to view Related Items :

     

     

    Gas Anesthesia Mask for Stereotaxic

    Designed for mice or rats in a Stereotaxic Instrument. The Gas Adaptors for Stereotaxic instruments, enable gas anesthesia of rats or mice in a Lab Standardâ„¢ or other stereotaxic instrument, without exposing the researcher to the gas. The Gas Anesthesia mask is installed by removing the nose clamp from the standard rat adaptor, and sliding the adaptor over the incisor bar, with the cone opening toward the open “U”. The animal (rat or mouse) is installed by placing its teeth over the incisor bar, and sliding the adaptor forward until the cone is snug about the animal’s nose, thereby substituting for the nose clamp. The teeth and the cone provide a snug, stable hold. Anesthetic gas flows in the tubing connector, past the animal’s nose, and out the other side, where it may be routed to recycling, exhaust, or gas analysis instruments.

    Model 51609 Gas Anesthesia Mask, Mouse -Pictured at left $239.00
    Model 51610 Gas Anesthesia Mask, Rat -Pictured at right (Rat Adapter not included) $239.00

    Stereotaxic Gas Anesthesia Masks With Platform


    Anesthesia Masks enable gas anesthesia to be used with rats and mice while operating.The Gas Anesthesia Platform and Mask models provide for precise and secure positioning of an animal during anesthesia and surgery.

    • Model 50264 (Gas Anesthesia Platform and Mouse Mask Pictured) can be used with the Mouse/Neonatal Rat Adaptor (model 51625) which is used on the ‘Rat and Mouse’ Lab Standard model stereotaxics, the Just for Miceâ„¢ (model 51725) or as a stand-alone platform for dorsal surgery.
    • Model 50267 (Gas Anesthesia Platform and Rat Mask) allows for anesthetization and positioning of the rat outside of a stereotaxic device. It also is an ideal platform for dorsal surgery. The platform provides a means of easy movement of an anesthetized rat to and from a stereotaxic apparatus or other device.
    • The Gas Anesthesia mask is installed over the incisor bar, with the cone opening toward the open “U”. The animal (rat or mouse) is installed by placing its teeth over the incisor bar, and sliding the adaptor forward until the cone is snug about the animal’s nose, thereby substituting for the nose clamp. Once the teeth and the cone provide a snug, stable hold, the platform is lifted onto an appropriate stereotaxic device.
    Model 50264 Gas Anesthesia Platform with Mouse Mask (Pictured) $410.00
    Model 50267 Gas Anesthesia Platform with Rat Mask $410.00
    Model 50264-MR Gas Anesthesia Platform with Mouse Mask, MRI Compatible $410.00
    Model 50267-MR Gas Anesthesia Platform with Rat Mask, MRI Compatible $410.00

    Click for more info

    Gas Anesthesia Masks for Stereotaxics

    Designed for mice or rats in a Stereotaxic Instrument. The Gas Adaptors for Stereotaxic instruments, enable gas anesthesia of rats or mice in a Lab Standardâ„¢ or other stereotaxic instrument, without exposing the researcher to the gas. The Gas Anesthesia mask is installed by removing the nose clamp from the standard rat adaptor, and sliding the adaptor over the incisor bar, with the cone opening toward the open “U”. The animal (rat or mouse) is installed by placing its teeth over the incisor bar, and sliding the adaptor forward until the cone is snug about the animal’s nose, thereby substituting for the nose clamp. The teeth and the cone provide a snug, stable hold. Anesthetic gas flows in the tubing connector, past the animal’s nose, and out the other side, where it may be routed to recycling, exhaust, or gas analysis instruments.

    Model 51609 Gas Anesthesia Mask, Mouse – Pictured on Left $242.00
    Model 51610 Gas Anesthesia Mask, Rat -Pictured on Right (Rat Adapter not included) $242.00

    Click for more info

    Mouse and Neonatal Rat Adaptor


    This adaptor allows using mice and rats even if you only have a rat stereotaxic frame. This adaptor is designed for use with traditional ‘U’-framed stereotaxic instruments like the Classic Lab Standard series. Ear and bite bar heights can be independently adjusted to accommodate all needs.

    Model 51625 Mouse and Neonatal Rat Adaptor $1,395.00
    Model 51825 Mouse Adaptor for Model 51800 (Large Animal) $1,395.00

    Click for more info

    GasVak Multi-Station Gas Scavenger System

    This active scavenger unit removes waste anesthetic gases from the pop-off valve on anesthetic machines or from the end of a non-rebreathing circuit. Atmospheric equalizers adapt each anesthesia machine to an evacuation hose which can be routed to either a ceiling or wall outlet w/balancing valve. The waste gas is then vented outside the clinic via 1 ½” or 2″ PVC pipe and a vacuum fan. An additional balancing valve and atmospheric equalizer is required for each additional anesthesia location.

    Model J-302 Two-station GasVak Unit
    (Includes two ceiling balancing valves & two atmospheric equalizers)
    $1,600.00
    Model J-302D2 Ceiling Outlet w/Balancing Valve $214.00
    Model J-302D2W Wall Outlet w/Balancing Valve $317.00
    Model J-302D1 Atmospheric Equalizer (attaches to anesthesia machine) $288.00

    Gaymar TP700 T/Pump – Pads

    T/Pump System Localized Warming and Cooling Therapy

    NOTE: This item currently has a shipping lead time of over 90 days.

    The new 700 series T/Pump? system replaces the popular model TP650 providing safe and effective warming and cooling therapy with precise temperature control. By circulating water through a leakproof pad, conductive temperature therapy effectively treats a variety of localized conditions including muscle and joint pain, arthritis, and edema. It also helps prevent body heat loss and hypothermia during veterinary surgery and recovery. Surround your patient with continuous warmth by connecting two Mul?T?Pads to one T/Pump?. Gaymar provides adapters for all major brands of heat therapy pumps.

    • For warming therapy, select from 50?F (10?C), 95?F (35?C), 100?F (38?) or 107?F (42?C) set points
    • Cooling setting delivers 50?F (10?C) therapy using ice in reservoir
    • Three-layer safety system with dual temperature sensors, dual microprocessors and a mechanical thermostat to ensure patient safety
    • Illuminated LED control panel, comfortable handle, built-in hose and cord storage and translucent water reservoir all were designed for ease of use in any facility
    • Uses tap water (and ice cubes if cooling)
    • Timed temperature therapy cycles can be set to 20 minutes, 30 minutes or continuous therapy
    • Optional T/Pump Stand available for convenient placement and ease of transport (comes with storage basket for pads and accessories)
    • Size: 8″w x 11.5″h x 8″d (20cm x 29cm x 20cm)
    • Weight: 6.7 lbs. empty (3.0kg)
    • UL Listed, CSA Approved – One year warranty

    TP-700 STD THERMAL RECIRCULATING HEAT PUMP 120V $645.00
    TP-471 ADAPTER HOSE $45.00
    TP3 (3″x23″) Single use/10 per carton $00.00  Discontinued
    TP12 (13″x18″)Single use/20 per carton /8002-062-012 $242.00
    TP22E (15″x22″) Single use/20 per carton /8002-062-022 $216.00
    TP26E (18″x26″) Single use/10 per carton /8002-062-026  $120.00
    TP22C (15″x22″) Single use/ 1 per pkg /8002-062-022-S $28.00
    TP22G (15″x22″) Re-usable/Heavy Duty Vinyl /800-206-2022 $86.00
    121218 (12″x18″) Re-usable Heavy Duty Pad $32.00
    122922 (22″x30″) Re-usable Heavy Duty Pad $34.00
    125923 (24″x60″) Re-usable Heavy Duty Pad $61.00

    i4 SEMI-PLAN LED MICROSCOPE

    Infinity Semi-Plan optics with a 30-year anti-fungal coating match quality with value within any clinic’s budget.

    • 4X , 10X , 40X , 100X/Oil Semi-Plan Objectives
    • Infinity corrected optics
    • LED Illumination
    • 1.25 NA ABBE Condenser with Iris Diaphragm & Filters
    • Seidentopf Head with 12.5X Eyepieces
    • Limited Lifetime Warranty on Stand & Optics/One Year Warranty on electronics.

     

    Model I4M-B04A-ISL3 i4 SEMI-PLAN MICROSCOPE $924.00